PISCO'S NEW AIR TANKS REDUCE VACUUM PRESSURE FLUCTUATION AND PULSATION

Pisco's New Air Tanks reduce air and vacuum pressure fluctuations and pulsations. Tanks are available in 6 sizes: 0.11gal, .2gal, .53gal, 1.32gal, 2.64gal and 5.28gal.

The air tanks are made of stainless steel and are environmentally friendly.

 

© 2005 Pisco USA, Inc. All rights reserved.

 

 

 

PISCO INTRODUCES ROTARY VACUUM PUMP - HIGH EFFICIENCY, LIGHTWEIGHT AND LOW HEAT GENERATION

PISCO USA, INC.'s New Rotary Vacuum Pump utilizes a magnet coupling which eliminates sliding of the rotary shaft seal and results in no heat generation by the seal. This rotary vacuum pump features long life, less maintenance (maintainance-free for 3 years), low generation of heat (approximately 68 degrees F lower than other brands), and low noise operation.

Long service life is attained through the use of super engineered plastic which has self-lubricating and abrasion characteristics and special surface treatment for improved durability.

Applications include suction transport, vacuum chuck, vacuum packing, defoaming/deaeration, bagging and vacuum forming.

 

 

PISCO INTRODUCES INDUSTRY'S FIRST FLOW CONTROLLER WITH BUILT-IN SHOCK ABSORBER FUNCTION

PISCO USA, INC.'s New Flow Controller is the industry's first to feature a built-in shock absorber function. These flow controllers use a 2-stage speed control to regulate exhaust speed and to absorb shock in pneumatic cylinders.

Pisco flow controllers have 3 needles to adjust the initial speed of the cylinder (first stage), speed of the brake (second stage) and timing of the speed shift. The second stage speed of Pisco Flow Controllers provides a cushion and reduces the speed at the end of the stroke. This speed reduction also lessens shock by up to 1/9 while retaining the same cycle time. In a system that uses conventional shock absorbers and Pisco Flow Controllers, it is possible to actuate the initial cylinder stroke at twice the regular speed and then actuate the end of the stroke at the regular speed to reduce cycle time without increasing shock.

Cost benefits of this flow controller are achieved from a combined 2-in-1 design and long-lasting performance. These 2-stage speed controllers last three times longer than a system equipped with conventional shock absorbers and they require less maintenance. In a conventional system, shock absorbers require frequent replacement, resulting in significant costs over the life of the product.

Pisco's Flow Controllers are available in 4mm, 6mm and 8mm metric sizes and 5/32, 1/4 and 5/16 inch sizes.

 

 

PISCO INTRODUCES VACUUM GENERATOR VVV - MULTI-STAGE NOZZLE HIGH VACUUM EJECTOR

PISCO USA, INC.'s New Vacuum Generator - VVV features a multi-stage nozzle, high-vacuum ejector at a low air pressure supply.

The VVV Vacuum generators ensure high vacuum pressure and high vacuum flow by low 50.8psi air supply. The vacuum port enables easy distribution by 3 ports and the vacuum port direction can be changed. They also feature easy maintenance and long life.

Applications include suction transport, vacuum packing and defoaming/deaeration.

 

PISCO UNVEILS ANTI-STATIC AIR PINCETTE (VACUUM TWEEZER) SERIES FOR MINIATURE PARTS ASSEMBLY

PISCO USA, INC.'s New Air Pincette Series combines a vacuum pad and a vacuum generator into a pen-like body. This series is ideal for small part assembly in environments where static electricity is an issue. Surface resistance is104~108Ω. A 4mm OD tube supplies 0.5MPa of compressed air and generates a vacuum, upon closing a hole or pushing a button, to pick up a small parts.

Two Air Pincette types are available. The Built-In Push Valve VTB Type, which only releases air during use for reduced air consumption and low noise output, and the No Push Valve VTA Type.

 

 

PISCO'S NEW SLOT-HEAD SPEED CONTROLLER IS DESIGNED TO REDUCE UNNECESSARY SETTING CHANGES

New from Pisco, the Type JSD Slot-Head Speed Controller reduces unwanted adjustments, and ensures settings are maintained during operation. Based on the design of Pisco's Type JSC Speed Controller, the Type JSD does not include the external needle needed to make speed adjustments. Instead, to ensure consistent speeds, a separate screwdriver is required to make any adjustments. The absence of a built-in tool has resulted in a space-saving design: the height of this new controller to approximately 2/3 the height of its conventional counterpart.

The JSD is available in an Elbow type with a 360 degree rotatable x-axis resin body and a Free type with a 360 degree rotatable x- and y-axis resin body. Both operate with air as a medium and feature operating pressure ranges from 14.5 - 130 psi, check valve opening pressure of 7.25 psi and operating temperature ranges from 32 - 140 degree F. The Type JSD is ideal for use in packaging and factory automation applications.